BUSCHUR'S 2G DSM 2.3 SHORT BLOCK

The Buschur 2.3 uses a 4G63 block with a longer stroke. For a car that is primarily street driven there is no better choice. The recommend RPM limit is 8500. This limits the speeds that can be reached in the 1/4 mile on the stock gear ratio. 142 mph is about the max in 4th gear. There are other gearing options available. General rule of thumb is if you want to go much quicker than 9.90's this is not the engine you should chose. IF you want a FUN car to drive, do autocross or road racing this is absolutely your best choice. Available in steel rods only.

What is included in the shortblock? With the Buschur Racing 2.3L shortblock you get the shortblock with the entire rotating assembly installed.

You will receive:

• Race bearings (Rod, Main and Thrust)
• Balanced & polished crank shaft
• Buschur racing balance shaft eliminator kit
• ARP Fasteners *does not include head studs)
• I beam connecting rods
• Forged Pistons, HD pins and rings

Prior to assembly each engine is gone over thoroughly before we progress further into assembly here at Buschur's in order to avoid any and all situations that a customer may have.

Along with this engine we also recommend a complete engine gasket kit, new headstuds and all brand new belts & tensioners.

If you have had an engine failure we HIGHLY recommends a brand new oil cooler be purchased at the time of the engine rebuild. Failure to do so can have catastrophic consequences.

PLEASE NOTE: ***A GOOD SPLIT THRUST BLOCK CORE IS REQUIRED*** Additional CORE CHARGE of $2000 (price includes block, oil squirters and oil squirter bolts ONLY! If your block core are not at our facility before your engine is ready to ship the core fee's will be in effect.